View 2SD2162_397380.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
SILICON POWER TRANSISTOR
2SD2162
NPN SILICON EPITAXIAL TRANSISTOR (DARLINGTON CONNECTION) FOR LOW-FREQUENCY POWER AMPLIFIERS AND LOW-SPEED SWITCHING
The 2SD2162 is a Darlington power transistor that can directly drive from the IC output. This transistor is ideal for motor drivers and solenoid drivers in such as OA and FA equipment. In addition, a small resin-molded insulation type package contributes to high-density mounting and reduction of mounting cost.
ORDERING INFORMATION
Ordering Name 2SD2162 Package Isolated TO-220
(Isolated TO-220)
FEATURES
* High hFE due to Darlington connection hFE 2,000 (VCE = 2.0 V, IC = 3.0 A) * Full mold package that does not require an insulating board or insulation bushing
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current (DC) Collector current (pulse) Base current (DC) Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC(DC) IC(pulse) IB(DC) PT Tj Tstg TC = 25C TA = 25C PW 10 ms, duty cycle 50% Conditions Ratings 150 100 7.0 +8.0, -5.0 +12, -8.0 0.8 25 2.0 150 -55 to +150 Unit V V V A A A W W C C
INTERNAL EQUIVALENT CIRCUIT
1. Base 2. Collector 3. Emitter
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D14865EJ2V0DS00 (2nd edition) Date Published April 2002 N CP(K) Printed in Japan
(c)
2002 1998
2SD2162
ELECTRICAL CHARACTERISTICS (TA = 25C)
Parameter Collector cutoff current DC current gain Symbol ICBO hFE1 hFE2 Collector saturation voltage Base saturation voltage Gain bandwidth product Collector capacitance Turn-on time Storage time Fall time VCE(sat) VBE(sat) fT Cob ton tstg tf Conditions VCB = 100 V, IE = 0 A VCE = 2.0 V, IC = 3.0 A VCE = 2.0 V, IC = 5.0 A IC = 3.0 A, IB = 3.0 mA
Note
MIN.
TYP.
MAX. 1.0
Unit
A
2,000 500 0.9 1.6 30 50 1.0 3.5 1.2
15,000
Note
Note
1.5 2.0
V V MHz pF
IC = 3.0 A, IB = 3.0 mANote VCE = 5.0 V, IC = 0.8 A VCB = 10 V, IE = 0 A, f = 1.0 MHz IC = 3.0 A, RL = 16.7 , IB1 = -IB2 = 3.0 mA, VCC 50 V Refer to the test circuit.
s s s
Note Pulse test PW 350 s, duty cycle 2%
hFE CLASSIFICATION
Marking hFE1 M 2,000 to 5,000 L 3,000 to 7,000 K 5,000 to 15,000
SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT
%DVH FXUUHQW ZDYHIRUP
&ROOHFWRU FXUUHQW ZDYHIRUP
2
Data Sheet D14865EJ2V0DS
2SD2162
TYPICAL CHARACTERISTICS (TA = 25C)
7RWDO 3RZHU 'LVVLSDWLRQ 37 :
:LWK LQILQLWH KHDWVLQN
&DVH 7HPSHUDWXUH 7& &
'HUDWLQJ G7
&DVH 7HPSHUDWXUH 7& &
&ROOHFWRU &XUUHQW ,& $
&ROOHFWRU WR (PLWWHU 9ROWDJH 9&( 9
&ROOHFWRU &XUUHQW ,& $
6LQJOH SXOVH
&ROOHFWRU WR (PLWWHU 9ROWDJH 9&( 9
7UDQVLHQW 7KHUPDO 5HVLVWDQFH UWKW &:
:LWKRXW KHDWVLQN
:LWK LQILQLWH KHDWVLQN
3XOVH :LGWK 3: V
Data Sheet D14865EJ2V0DS
3
2SD2162
3XOVH WHVW
%DVH 6DWXUDWLRQ 9ROWDJH 9%(VDW 9 &ROOHFWRU 6DWXUDWLRQ 9ROWDJH 9&(VDW 9
3XOVH WHVW
'& &XUUHQW *DLQ K)(
&ROOHFWRU &XUUHQW ,& $
&ROOHFWRU &XUUHQW ,& $
4
Data Sheet D14865EJ2V0DS
2SD2162
PACKAGE DRAWING (UNIT: mm)
%DVH &ROOHFWRU (PLWWHU
Data Sheet D14865EJ2V0DS
5
2SD2162
* The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SD2162

	To Download 2SD2162 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .